[Mark Hanson]

in reply to: Vendors Search #6905

Hello Nishit thank you for your updates for #6902 all clear will report to the team about that.
for #6903 looks good to me will send request to the tester to check this job. The site admin testers not working on weekend so we might hear from them next week and send this report to finance and you.

Meanwhile will prepare the next Job description and updated you accordingly.
Cheers

[Mark Hanson]

in reply to: Vendors Search #6901

Hello Nishit, thank you for your reply,
for # 6900 i have been consulting with our team regarding the data base storage and we are very interested in your idea pulling out the numbers stock in to our DB and get all the mechanisms on the site working based on both Vendor and EN data stored.

There are numbers of factors here that we are not sure about and here are their below:

1) we worried about the numbers synchronization process, due to a large DID stock and limited API calls allowed from Peerles 100 and i think it is about some thousands from Intelligent we are not sure how all our numbers stock will be validated and used / purchased by the customers requests with out loading the system architecture.

2) Secondly if there is a way how to maintain all this logistics and algorithms whether you are able to do so so it works at the best performance.

3) if you got an idea how to build up a smart system for 1 and able to do it for 2 then we worried about our technical ability to cope with this amount of data as we thinking about multiple cron jobs performance and loading up and flushing unwanted data from the system and our technical resources are capable for this project.

we can see the totals fetching from both vendors are being already showing up on this page https://excellentnumbers.com/admin/index.php?ToDo=viewTemplates (by the way we asked yo to move this page to the site settings links) what we suggest you to do use this data and multiply its total to 2.5 as per task then when we finished this job we would like you to do #6900 on voip first and if you can improve Voip DB and numbers DB efficient storage and ordering flow we will do it on EN.

As you can see there are plenty work to do but at this stage there wont be any numbers storages on the EN db (for now) as there are many risks factors involved and we have got very tight budget for all this ideas due to ELEC inventory job delay.

Let us finish Vendors Search job and Total numbers widget using the resources we currently have and then we will go further with our project plans.

For #6899 looks much better Nishit – thank you awaiting for a site admins feedback.
Cheers

[Mark Hanson]

in reply to: Vendors Search #6898

Hi Nishit i had a look at CLEC inventory loading GIF and search functionality,
here are my opinion comments below:

1) The loading GIF is better that the content is not going blank but the loading gif looks not really good it is sitting at the top of the page for some reason i guess the site admin tester will reply on this as they have alreay mentioned many times that they would like to have the loader positioned at the center of the page not at the top header.

2)also we can see the gif squares on the deemed background looking not perfectional i wounder if you can make a gif on a transparent background so the globe loads over with no squer white background to be honest it does not look professional.

3) Searching numbers i used various states and their area codes it looks you did the job as it has been requested so ppl not guessing each state area codes, but i honesty i could not find any number and always seen error saying record not found.

Once again it is my quick look on this but i have sent request to check someone from site admins and they may be reply with different feedback but what ever i mentioned at the top that’s what they usually check for.

So if anything can be fixed i would fix it will wait for the admins reply.
Cheers

[Mark Hanson]

in reply to: Vendors Search #6897

Hello Nishit sorry for late reply we are very busy here with other projects. I will get someone to test it and get back to you. When you finish Total Numbers Widget will check and go to an other job if you wish to continue.

Cheers

[Mark Hanson]

in reply to: Vendors Search #6895

Hello Nishit we will check #6889 and get back to you.

for Query :- I can not get this point.
“you can launch a search inside of any vendor’s portal to check numbers availability to double check if the EN CLEC search working right.”

My point was so the search fetches same numbers as shown on vendors search, customers somtine check the numbers availability on vendors portal and check same on EN. So just to double check that search works sharp. If numbers 2222222 available on vendors site thes should be available on EN in 30 mins (unless it is not sold else where)

if the loading gifs done and area codes do you think we can check it now or rather wait when you finish Total Numbers – Show Case Block?
Cheers

[Mark Hanson]

in reply to: Vendors Search #6892

Hello Nishit , please find new task added to this Job,
Total Numbers – Show Case Block

Here we would like you to use a 80% of your design skills and 20% as a coder.
Please create a BEATUFUL looking showcase block which display total numbers available from both Peerless and Inteligent
As we can see currently Peerless has got around ~5 million numbers and Inteligent ~25 million which is total ~ 30 million numbers.

The showcase block should be positioned on the CLEC inventory page just above the search form. Depending on your design outcome and how you going to make it we will decide whether it should be centered or aligned right the page.

On showcase block the total numbers formula should display the total numbers as following ~5M+~25M x 2.5 = ~ 75M numbers. The codding is easy to display this formulated total in the block. However, the design part should look very outstanding, the wording – nice font, block in the great frame , total number may vary in being streamed in real time and it should change all the time as the vendor’s numbers being sold and added on both PeerLess and Inteligent continuously.

Please make the total number displayed in full decimal digits .
Cheers

[Mark Hanson]

in reply to: Vendors Search #6889

Hello Nishit just checked loading gif and how it works up on searching and site browsing and still finding same issues,
When we request a number on Vendors Search and click search – the page goes totally blank with the loading gif in the middle. As advised please keep the loading gif over the content so the page content not going blank.

Also we think something happened with search again when we request some numbers: We tried California – 510 last 4 digits 5333 and 5444 and responded with error technical issue.

Probably you are still working on area codes as we can see on every state the certain area codes displayed which is right but no RAF confirmation from you yet.

So please just check once finished. Please remember you can launch a search inside of any vendor’s portal to check numbers availability to double check if the EN CLEC search working right.

Cheers

[Mark Hanson]

in reply to: Vendors Search #6888

Hello Nishit thank you for your updates we will look at loaders and test across the site and get back to you if any issues.

Cheers

[Mark Hanson]

in reply to: Vendors Search #6886

Hello Nishit thank you for your updates, i hope you have had a good weekend,

for #6885 – #6883 : thanks mate please let us know when we can test it.

For #6884 – yes please let us stick to what’s vendors rules are and this way we may reduce are codes misses.

So we use API based area codes selection but still with EN States library, what i mean here is please keep all the EN States so customers can see all the sates as on other EN pages, and if any EN state has got area codes but API does not have still list that State EN area codes and on request search page,if nothing found on API return error somthing like API area code unavailable.

Doing this way will be aware about which area codes do not have API and discuss with our vendors developers.
Cheers

[Mark Hanson]

in reply to: Vendors Search #6884

Hello Nishit for #6881 we have been checking Vendor search loading issue and finding it much better working after your fix. Thank you for that.

It looks it is getting better and we hope we finalize this job soon.

Just one recommendation come up here – we noted that ppl doing loads of mistakes while requesting search numbers they add state Alabama for example but for area code they use different state area codes thus would you please adjust the searching requests parameters synchronizing country states with its area codes.

For example if customer select Alabama the following area codes become available in the next field drop down.
If Alabama selected

following area codes become available and other area codes make hidden
205,251,256,334,659,938
and so on.

We believe this will reduce number of errors sent and improve vendor search efficiency.
Cheers

[Mark Hanson]

in reply to: Vendors Search #6883

Hello Nishit, when you are back please check the following issue:

When we login from a client who’s got no numbers and click on my numbers link the blank page come up with loading globe gif in the middle and this process does not stop.

Cheers

[Mark Hanson]

in reply to: Vendors Search #6882

Hello Nishit thank you for your updates,
sure have a lovely trip mate!

Meanwhile will be checking site and get back to you if any issues!
Cheers

[Mark Hanson]

in reply to: Vendors Search #6880

Hello NIshit thank you for your updates,
in #6876 yes we need loading gif c) while processing search request and everywhere else. Can we make it searching more efficient not sure why it takes so long wating time to search the numbers but when we search numbers we know they are available but page load just very loong can you please check that something is wrong there.

loading image b) can be replaced with c) as loading image b) is old and can be removed and replaced with globe.

loading image a) is not a big problem where it is but when clients request any operations or search should be everywhere loading image c) .

for #6870 Coupon code selection will be checked and reported back to you.

also thank you for Error Email changes : will monitor other issues,
cheers

[Mark Hanson]

in reply to: Vendors Search #6875

Hello Nishit how is all going, any EST when this job will be complete?

We have tried to test some points today and here is the logs below:

1) tried to search 6666 number on peerless and clicked search on ELEC Vendors Search. We know that the numbers are available on Peerless but when we clicked search the entire page gone blank with the loading gif in the middle of the page. The questionis why all the page content gone blank we need the loading gif glob hovering on the top of content while searching.
2) The page got frozen and then we saw a message wait for page and we decided to wait and after a looong time
we saw a error and could not get the numbers list. Another question is why it is still not working and when we can use it. It has been a few weeks passed since we started this job?

BUGS FOUND

Traditionally when we do a work something else is breaking up please refer to this errors found on the site:

3) New Numbers widget that you done looks good now BUT if not registered users open a landing page they will see this https://webmaklay.com/wp-content/uploads/2022/08/bug1.jpg a “new” number without activation link. This is because the number has been sold BUT still showing on the new numbers widget. Moreover you can click on this number and it show unavailable BUT you still can activate it https://webmaklay.com/wp-content/uploads/2022/08/Bug2.jpg ..bunch of errors…could you please fix it.

4) When unregistered user clicks on the number enquiry it leads to a contact us page if you look at contact us page the map has moved to the bottom corner could you please align it.

cheers

[Mark Hanson]

in reply to: Vendors Search #6872

thanks Nishit!

[Author]

Posts