[Mark Hanson]

in reply to: Voip Optimisation #9859

Hi Nishit just rang finance and heard that Port Out task also not done yet could you please update about this task?
So we can check.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9858

Hello Nishit thank you for more updates and changes it looks much better,

could you please also advice how the Remove Older Record button works (Notification page) when we click on it nothing happens is it working?

On notification setting page could you please set a button for manual notification update in here: https://webmaklay.com/wp-content/uploads/2022/11/update-now.jpg if site admin pushes that button the notifications deliver immediate updates on all notification parameters.

There is an addition task for Notification Settings will wait when you do that, meanwhile send some reports to finance.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9851

Hello Nishit please find some comments below:

Vendors Optimization – as per task description we not finding any synchronization button. Looking at the jobs archive we used to do this page to control API synchronization process between our Vendors and Voip. As PeerLess provide limited amount of numbers per session we used to fetch this Vendor Multiple times and store all numbers on Voip DB.

Unfortunately we found this process inefficient and as your said we now done the work to request all numbers directly from API – could you please confirm Voip – Vendors numbers data transfer.
We tried to switch Inteligent 2 hours duration on clicked apply and it is not saved why it is? If we now request numbers right from API then we would need to re organize this page as per Vendor – Voip API data transfer requirements. Please advice.

Notifications Settings Optimization – We can see your amendments but it is still not complete, there will be addition task added to its job page – Notifications Optimization addition please check.

a) We would need to site Admin when adding a new notification raw to be able to select an area code for new numbers real time monitoring for example area code 212 then please allow number fields left empty so if any new area code numbers appear on our Vendors DB to be detectable (notification sent to voip site Admin) at the same time when 212 area code numbers released.

b) since we leaving numbers filed empty we are not specifying which numbers to be notified about and this could be 5 numbers released or even 10000 numbers. So we would need to limit notification message for this scenarios so for the Numbers empty fields raws notification sends up to 10 notifications and if more numbers released – let it send notification like; ” 212 area code, Vendor Inteligent 3000 numbers released” once site admin informed we can specify its 212 numbers search criteria’s.

Notification Page – Not complete

a) we tried to click on “Show Number Details” this option did not work for us.
b) we can see you added tick option at the front of their raws but we still can not see bulk selection/deletion.
c) we still cannot find filtering option as per task description.

Could you please complete this so we can continue our checks.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9850

Hello Nishit thank you for your updates, will check all the tasks and get back to you. Please also check all the tasks from your end just to make sure that everything mention has been implemented.

Hoping all done as per job if so we are going to move forward.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9843

Hello Nishit we haven’t heard from you last night, we have also checked clause 3) Voip Portal – Settings – Notification
and found it not done, in fact the functionality worked before is not working now. Site admin can not create a new notification Row and we we proceed it display source code error.

https://webmaklay.com/wp-content/uploads/2022/11/Error.jpg

[Mark Hanson]

in reply to: Voip Optimisation #9822

Hi Nishit in correction to #9821
since the tasks haven’t been paid yet it should look as below:

1 Dashboard 1 – RAFed (reported as finished)
2 Portout Repairs, Optimization – RAFed (reported as finished)
3 Voip Portal – Settings – Notification – Please update
4 Voip Portal – Notification Page – Please update
5 Voip Portal – Vendors – Please update

Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9821

Hello Nishit, thank you for your updates, for your question in #9819 we go as per your reports:
For example as your say you have done Dashboard 1 task we report to the customer tester and when tester gets back to us with comments we feed back it to you since we haven’t heard any thing from tester we push the task to finance.

Since the task sent to finance and paid to nominated developer the task has been complete. This has been happening with most of temp developers. In your case, as we work with you for a long time now we consider you as a permanent contractor so we book / schedule all incoming jobs to provide permanent stable income for permanent contactor – YOU.

Long term business relationship builds up a level of trust this is why the finance sometime pay for task prior to the testers feedback. This is why it is very crucial stick to the task if you take an extra job somewhere else and it causes delay with our scheduled jobs it may affect some payments delay or budget cuts (although we have been instructed to not apply any budget cuts to permanent “siliconinfo” contractors) in fact the more tasks you do and no delay we are looking at pay increase for Siliconinfo contactors.

So from above said the completed job we consider – all the task/jobs you reported completed “RAFed” – Reported as finished. Since we hoping you are permeant contactor the priority for us is for you to get paid in time. This is a level of trust and using an opportunity to ask you a favor please check, test all the task from your end before reporting “completed”.

As per your #9820: We trust that:

1 Dashboard 1 – completed
2 Portout Repairs, Optimization – completed
3 Voip Portal – Settings – Notification – Please update
4 Voip Portal – Notification Page – Please update
5 Voip Portal – Vendors – Please update

Please advice 3,4,5 complete if not please advice their completion EST.
It would be great of you could complete all job before Wednesday AU/NZ time (see the timer on the job page) so we could increase your payout. We report to tester to inspect in no reply all these goint to be sent to finance.

OUR PLANS
a) We wait when this job done to move to EN project there are some URGENT WORK arise in there.
b) Once complete we are coming back to VOIP project as there are loads of work in here but delay now to continue.
c) We are planning to give you a third project to keep you fully engaged https://webmaklay.com/friends-app/
there are some other plans for your as d,e and etc so it is all in your hands if you focus on these above it should bring to your company very good $ revenue.

Please let us know if any questions.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9818

Hey Nishit thank you for your updates, i hope you have had a great weekend.

For,
Portout Repairs, Optimization: does the update button works? If so just need to do the rest filtering option and display which i think you meant working on.

do you think we can finish this job by Wednesday as per your job timer set? It would be great as we will need to leave Voip project for sometime as we a bit delay with other jobs and come back to EN where some urgent jobs waiting for you.

Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9816

Hi Nishit thank you for your reply! it is good news that you can troubleshoot it.
Have a nice weekend.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9814

Hello Nishit how is all going? any updates today?
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9813

Hello Nishit in addition to my previous message, i have sent Dashboard 1 task to finance. As far as we discussed we are very much delay with this voip job, however finance still indicated their ability to add more funds to this job if the completion target date met.

Please find the job page updated for more details.

Voip Optimization

Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9810

Hi Nishit thank you for your updates, hoping finished by tomorrow, as we have got two more task to do on this job.
Please let us know if you need any help on this.

Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9808

Hello Nishit thank you for your updates will report to teste once notification task complete,
I haven’t heard any updates from the tester regarding Dashboard 1 task yet will catch up with them later again and sent this task to finance.

Will update your page after meeting with finance.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9806

Hello Nishit thank you for your updates, does the area codes data coming from API too?
for your query: Yes please let the site admin input area code manually instead of dropdown.
Cheers

[Mark Hanson]

in reply to: Voip Optimisation #9801

Hi Nishit hope you have had a great weekend, i havn’t got any feed back regarding Dashboard 1 task by today but i have recived some comments regarding Notifications task.
Settings -> Notification Settings

We know that you are still doing it but so far area codes drop down display a lot of ara codes and we need to scroll them down which is a big list. Some of the area codes. The question is where all these area codes being taken from? We have got new area code 840 but it is not in the list so we can not understand where these area codes data coming from.

Some area codes are missing. So what we recommend here is to make a field that site admin will input any area code manually and search from there. Could you please just replace drop down area codes feature by input area code.

For example we create a raw for the search combination that starts all numbers in 212 area code but when we create a raw the area code field is not appearing for selection.

Again we know that you are still working on it so just some tips for you while you in process.
Cheers

[Author]

Posts